Synthetic Rubber based on EPDM, with closed cells, without PVC and CFC, lesser than 5ppb Nitrosamin. Applications are thermal insulation of pipework, vessels and ducts in solar panels, gas lines, vehicle caps and dual temperature lines, steam, domestic installations, Air-Conditioning, Industry etc.
Advantages of our insulated stainless steel hoses for solar systems
-
Weatherproof, UV-stabile and PVC - free (Material made of EPDM with closed cells)
- Polyamide braiding for added protection during installation and against bird attack
- Standard Insulation thickness 19 mm. (Special offer 6 / 9/ 13 / 25 / 32 / 38 / 50)
- High flexibility of bellowed stainless steel pipe, forms permanently into shape
- Silicone insulated sensor cable 2 x 0.752, VDE 0295 (temperature resistant up to 180° C)
- Easy identification of feed and return
- Rapid connection and moulded insulation system saves money on pipe and wiring installation
- Easy to install in confined spaces
- Integrated piping, cabling and insulation system (Solar feed- and return with integrated Siliconeinsulated cable)
- No soldering required, less mess on installation
- Easy handling, No wastage of material
- Easy to cut to length
| Properties | Features |
| Insulation materials: |
Sythetic rubber based on EPDM, with closed cells, without PVC or CFC, lesser than 5 ppb Nitrosamin |
| Application | Thermal insulation of pipework, vessels and ducts in solar panels, hot gas lines, vehicle caps and dual temperature lines, steam, domestic installations, Air-conditioning industries etc. |
| Working temperature |
permanent working temp: -57°C bis +127°C (Rückfragen) temporar working temp -200°C bis 175°C - pleas eask your supplier |
| Thermal conductivity |
At 40°C 0.036W/mk |
| Water vapour diffusion resistance factor |
u > 5900 |
| Emissions | 5.3 (VKF) - only minimal smoke and gas emissions in case of fire |
| Fire-performance / Smoke-development |
Hight fire-resistance, self-extinguishing, doesn't drip and spread flame |
| Properties | Non-polarized base material (microwave test), Therefore resistant to water and moisture, resistant k-value, flexible even in low temperatures, UV-resistant |
| Noise insulation |
Noise reduction up to 30 dB (A) |
| Connections | Brass or stainless steel for self fitting. |
Dimensions
| DN | Nuts | A x B | Insulation thickness |
Min. bend radius |
| 12 | 1/2" | ca. 57 x 97 mm | ~ 19 mm | 130 mm |
| 12 | 1/2" | ca. 47 x 90 mm | ~ 13 mm | 130 mm |
| 16 | 3/4" | ca. 52 x 100 mm | ~ 19 mm | 150 mm |
| 16 | 3/4" | ca. 64 x 124 mm | ~ 13 mm | 150 mm |
| 20 | 1" | ca. 69 x 134 mm | ~ 19 mm | 180 mm |
| 20 | 1" | ca. 55 x 106 mm | ~ 13 mm | 180 mm |
| 25 | 1 1/4" | ca. 74 x 144 mm | ~ 19 mm | 200 mm |
| 25 | 1 1/4" | ca. 62 x 120 mm | ~ 13 mm | 200 mm |
| DN 32 and larger sizes on request |
||||
- Weatherproof, UV-stabile and PVC - free
(Material made of EPDM with closed cells)